Southern New Jersey Section EmComm

Share EmComm: Ideas; Problems; Solutions & Questions -- Section-wide & Beyond

This forum is open to anyone, anywhere.

You are not logged in. Would you like to login or register?



  • Index
  •  » No TX
  •  » Digital Modes
  •  » No transmit with Digital Modes

    • 1 of 1

     

    6/03/2021 4:38 pm  #1

    NJ2N
    Master of Disaster

    Offline

    Registered: 1/25/2020
    Posts: 279

    No transmit with Digital Modes

    THIS IS THE #1 CULPRIT WHEN DIGITAL MODES WILL NOT TRANSMIT!!!

    Fixes:

    Check to see that USB Audio Codecs are selected:
         1. In FLDigi: Configure/Soundcard/Devices
         2. In PC: In toolbar, right click on Speaker Icon. Select Open Sound Settings. Make sure Audio Codecs are selected for both Speaker and Microphone.
         3. For UHF/VHF: Signalink TX knob set at 3 o'clock. (This can be a fix if you've been operating with the TX turned down to minimize ALC for HF)

     

    7/09/2021 6:42 pm  #2

    NJ2N
    Master of Disaster

    Offline

    Registered: 1/25/2020
    Posts: 279

    Re: No transmit with Digital Modes

    When using FLAMP with FLDigi:
    Make sure both are "sync'd"  in the first two check boxes under the Configure Tab in FLAMP.

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » No TX
  •  » Digital Modes
  •  »  No transmit with Digital Modes

    • Board footera

     

    Powered by Boardhost. Create a Free Forum